Blow Moulding Machine

Blow Moulding Machine

Click here for details.

Blow Moulding Machine

Product ID: DMK-L3

Send Inquiry

The DMK-L3 blow moulding machine is PET stretched with high automation and intelligence working system. This equipment is in high quality because it can provide steady infrared heating system while blowing. It can also be controlled through touch screen and the running status will be shown on the screen immediately. Besides, it has precise blow-mould closing system to ensure the quality of your products. Another features of the blow moulding machine is that it is designed with closed production zone, so the good self-lubrication system can help you to avoid the contamination, building a win-win business for you.  The low-noise moulding machine also provides visual inspection, so you can monitor the production process any time.

Demark blow molding equipment has 6 cavities and the maximum capacity of the products is 700mL and 6000bottles/hr. The blow moulding machine can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc. The speed for 6 cavity is at 6000BPH, and 8000BPH for 8-cavity while 12000BPH for 12-cavity and 16000BPH for 16-cavity. The molding equipment is low cost as well as low consumption of electricity, air and water.  The blow moulding machine is easy to maintain, and we also concern about your safety while using the equipment, so we apply high techniques to produce standard and qualified machines.  

As for the setting, we adopt world-famous brand to level up the quality of the equipment. We apply Siemens PLC color display, FESTO pneumatic parts, and National controller of perform transfer servo motor for the blow moulding machine.  We aim at the best to serve our customers not only the best product but also the unforgettable experiences while applying the moulding machines. If you are interested in our products, please do not hesitate and make your own inquiry today!

Theoretical output 2000 3000 4000
Max.container volume 1.25L 2L 1.25L
Max.neck diameter 38MM 38MM 38MM
Max.container diameter 80MM 105MM 80MM
Max.container height 320MM 335MM 320MM
Number of cavity 2 3 4
Number of lamp 28 100 70
Max.heating power 42KW 100KW 84KW
Installation power 50KW 110KW 95KW
Actual power consumption 35KW 45KW 40KW
Operatating low pressure 0.7Mpa 0.7Mpa 0.7Mpa
Low pressure consuming 1400L/min 2000L/min 2000L/min
Blowing pressure 3.5Mpa 3.5Mpa 3.5Mpa
High pressure consuming 3500L/min 5500L/min 5000L/min
Operating pressure 0.3-0.5Mpa 0.3-0.5Mpa 0.3-0.5Mpa
Temperatuer 10 degree 10 degree 10 degree
Flow rater 30 L/min 40 L/min 40 L/min
Machine dimension 2.7x1.8x2.2 3.5x2x2.2 4x2x2.2
Machine weight 3500Kg 4200Kg 4800Kg
  • Stable performance with advanced PLC.
  • Conveying preforms automatically with conveyor.
  • Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
  • High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
  • High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
  • No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
  • Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
  • Strong clamping force with high pressure and double crank links to lock the mold.
  • Two ways of operating: automatic and manual.
  • Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
  • Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
  • Contamination is avoided for the bottle body.
  • Ideal effect of the chilling with the chilling system.
  • Easy installation and starting
  • Low rejection rate: less than 0.2 percent.
  • CE
  • TUV,ISO9001

Contact Detail