Pet Stretch Blow Bolding Machine

Pet Stretch Blow Bolding Machine

Click here for details.

Pet Stretch Blow Bolding Machine

Product ID: DMK-L2

Send Inquiry
A.Brief Introduction
DMK-L2 is fully-automatic pet stretch-blow molding machines. It has 2 cavity and the maximum capacity of the products is 2L and 2000bottles/hr. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:2000BPH(2-cavity), 3000BPH(3-cavity), 4000BPH(4-cavity), 6000BPH(6-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.

a).PLC colour display: SIEMENS(GERMANY)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other electric parts are all world-famous brand

C.Machine Features:
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.
Theoretical output 2000 3000 4000
Max.container volume 1.25L 2L 1.25L
Max.neck diameter 38MM 38MM 38MM
Max.container diameter 80MM 105MM 80MM
Max.container height 320MM 335MM 320MM
Number of cavity 2 3 4
Number of lamp 28 100 70
Max.heating power 42KW 100KW 84KW
Installation power 50KW 110KW 95KW
Actual power consumption 35KW 45KW 40KW
Operatating low pressure 0.7Mpa 0.7Mpa 0.7Mpa
Low pressure consuming 1400L/min 2000L/min 2000L/min
Blowing pressure 3.5Mpa 3.5Mpa 3.5Mpa
High pressure consuming 3500L/min 5500L/min 5000L/min
Operating pressure 0.3-0.5Mpa 0.3-0.5Mpa 0.3-0.5Mpa
Temperatuer 10 degree 10 degree 10 degree
Flow rater 30 L/min 40 L/min 40 L/min
Machine dimension 2.7x1.8x2.2 3.5x2x2.2 4x2x2.2
Machine weight 3500Kg 4200Kg 4800Kg
  • CE
  • TUV,ISO9001

Main Products

Pet Stretch Blow Molding Machine, Pet Preform Mold/Mould, Bottle Blowing Machines, Pet Preform Injection Molding Machine/System, Cap Mold, Cap Mould or Closure Mold, Closure Mould, Lid Mold, Lid Mould

Contact Detail