Fully-automatic Pet Stretch Blow Molder

Fully-automatic Pet Stretch Blow Molder

Click here for details.

Fully-automatic Pet Stretch Blow Molder

Product ID: DMK-L12

Send Inquiry
A.Brief Introduction
DMK-L12 is pet stretch-blow molding machines. It has 12 cavity and the maximum capacity of the products is 700mL and 12000bottles/hr. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed: 6000BPH(6-cavity). 8000BPH(8-cavity). 12000BPH(12-cavity). 16000BPH(16-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.

a).PLC colour display: SIEMENS(GERMANY)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other electric parts are all world-famous brand

C.Machine Features:
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.
Theoretical output 6000 8000 12000 16000
Max.container volume 0.7L 0.7L 0.7L 0.7L
Max.container diameter 38MM 38MM 38MM 38MM
Max.container diameter 70MM 70MM 70MM 70MM
Max.container height 250MM 250MM 250MM 250MM
Number of cavity 6 8 12 16
Number of lamp 60 36 36 36
Max.heating power 90KW 90KW 108KW 108KW
Installation power 100KW 100KW 120KW 130KW
Actual power consumption 50KW 50KW 70KW 70KW
Operatating low pressure 0.8-1.0Mpa 0.8-1.0Mpa 0.8-1.0Mpa 0.8-1.0Mpa
Low pressure consuming 2000L/min 2000L/min 2600L/min 4600L/min
Blowing pressure 3.5Mpa 3.5Mpa 3.5Mpa 3.5Mpa
High pressure consuming 2.8~3.5m³/min 2.8~3.5m³/min 5.0~7.0m³/min 7.0~9.5m³/min
Operating pressure 0.3-0.5Mpa 0.3-0.5Mpa 0.3-0.5Mpa 0.3-0.5Mpa
Temperatuer -10°C~55°C -10°C~55°C -10°C~55°C -10°C~55°C
Flow rater 50L/min 70L/min 80L/min 90L/min
Machine dimension 4.9x2.15x2.2 5.5x2.2x2.2 5.6x3x2.2 4.2x3x2.2
Machine weight 5000Kg 5000Kg 6500Kg 6000Kg
  • CE
  • TUV,ISO9001

Main Products

Pet Stretch Blow Molding Machine, Pet Preform Mold/Mould, Bottle Blowing Machines, Pet Preform Injection Molding Machine/System, Cap Mold, Cap Mould or Closure Mold, Closure Mould, Lid Mold, Lid Mould

Contact Detail