|
Product ID: P07
Rubber Table & Floor Mat
Grounding hardware is not included with rolls and must be ordered separately. Continuous runs of static dissipative materials should be grounded at six-foot (1.8m) intervals to ensure proper dissipation rates.
|
Rubber Table & Floor Mat
|
Specifications:
- RTT: 6.6 x 10^8 Ohms per ANSY EOS/ESD-S4.1 @100 Volts
- RTG: 6.6 x 10^9 Ohms per ANSI EOS/ESD-S4.1 @100 Volts
- Charge decay: < 0.02 seconds per EIA-541
- Thickness: 2.0mm, 3.0mm
- Width: 60cm, 90cm, 100cm, 120cm
- Length/Roll: 10m, 20m
- Color: green, gray, blue, etc
- Resistance classification: dissipative
- Material construction: two-layer rubber
- Surface: glare, non-glare
Features:
- Surface resistance and resistance to ESD ground is less than 10^9 ohms
- Durable, heat and chemical resistance, non-slip surface, lays flat
- Application: table, floor, shelf
- Use as either bench or floor mat
- Economical, easy to cut
- Easy to install
- Easy to clean and maintain
- Attractive shiny or dull finish
|
Main Product:
ESD Rubber Table Mat, Antistatic Glove/Shoe, ESD protective Tile, Clean Mat, Cleanroom Garments, ESD Packaging such as Shielding Film/Bag, Moisture Vapor Barrier Film/Bag, Tyvek, Conductive Foam, Antistatic Tape, Wrist Strap,
|
Ordering information:
- Minimum Order: Negotiable
|
You may be interested products:
|
Print this page
Send an inquiry