| Item \ Model | FTK-110 | FTK-120 | FTK-130 |
|---|---|---|---|
| Communication system | Full duplex | Full duplex | Half duplex |
| Wavelength | 1310+/-20nm | 1550+/-20nm | 1300+/-30nm |
| FWHM | 5nm or less than 5nm | 5nm or less than 5nm | 140nm or less than 140nm |
| Emitter type | Laser diode | Laser diode | Laser diode |
| Transmission distance | 80Km or more than 80Km | 120Km or more than 120Km | 15Km or more than 15Km |
| Dynamic range: 9/125Mu m | 40Db | 40Db | N/A |
| Dynamic range: 62.5/125Mu m | N/A | N/A | 20Db |
| Output power: 9/125M(TYP.) | -405dBm or less than -4.5dBm | -405dBm or less than -4.5dBm | N/A |
| Output power: 62.5/125M(TYP.) | -405dBm or less than -4.5dBm | -405dBm or less than -4.5dBm | -18dBm |
| Connector type | ST, FC, SC, D4, SMA, Biconic | ST, FC, SC, D4, SMA, Biconic | ST, FC |
| Output stability(TPY)(1/8HRS) | +/-0.05/+/-0.25Db | +/-0.05/+/-0.25Db | N/A |
| Temperature | +/-0.02dBm/Celsius | +/-0.02dBm/Celsius | N/A |
| Modulation mode | PCM | PCM | IM |
| LED indicators | Tx, Rx, CW/2KHZ, Low battery, Power on | Tx, Rx, CW/2KHZ, Low battery, Power on | Tx, Rx |
Specifications
- Size:
- Unit: 19.6(L) x 10.0(W) x 4.0(H)(Cm), 7.7(L) x 3.9(W) x 1.6(H)(In)
- Shipping: 39.4(L) x 35.2(W) x 11.7(H)(Cm), 15.5(L) x 13.9(W) x 4.6(H)(In)
- Weight: Unit is 0.58kg(1.28Lb) and shipping is 2.8kg(6.17Lb)
- Powering:
- 10 hours(typ.): Continuous use Ni-MH battery for operation(FTK-110, FTK-120 only)
- 1 hours(typ.): Continuous use Alkaline battery for operation
- 14 hours(typ.); Charging time for a full discharged battery
- Continuous: Using AC Adapter
- Temperature:
- Operation: 0~50 Celsius(32~122 Fahrenheit)
- Storage: -10~60 Celsius(14~140 Fahrenheit)
- Humidity: 0 to 95%(Non-condensing)
- Standard accessories: Carry case, AC charger, Ni-MH battery(FTK-110, FTK-120 only), Alkaline battery head set with boom microphone, Rubber bumper, Operation manual
Features
- Measurements made at 23+/-2 Celsius unless otherwise specified
- The test with Corning SMF-28 single mode fiber with FC connector
- At 23+/-2 Celsius after a 20-minute warm-up period for 1 hour testing
- At 23+/-2 Celsius after a 20-minute warm-up period for 8 hours testing
- For temperature variation from 0~50 Celsius
- Other connector types or specification can be provided on special request
Main Products
fiber optic test & measurement equipment, fiber optic data link products