Specifications:
- Belt and pulley of our company can be attachment or replacement of imported belt and pulley.
- Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width.
- The tolerance of outside diameter, end bounce 7 wrap direction of pulley should conform to Form1,form 2 & form3.
- Width of different specification of timing belt and pulley must conform to form4.
- Outside diameter of pulleys and size should be as form's regulation.
- We can also produce pulleys even sizes are not in the form.
- The material of pulley mainly composed of carbon steel, if possible aluminum alloy nylon can also be employed; if external diameter is larger than 250 mm, iron is used.
Features:
- The pitch&tooth type of double sided timing belt is same as synchronous belt.
- There are two kinds of double sided timing belt:
- DA type: Arrangement symmetrical ( see section a)
- DB type: Arrangement overlapping ( see section b)
- Note: we can produce symmetrical (DA) & overlapping (DB) two kinds double sided timing belt, for particular specification, we can also make according to clients' drawing or sample
Ordering information:
- Minimum Order: Negotiable
- TEL: 86-574-63886178
- FAX: 86-574-23700556
- E-mail: ciegroup@hotmail.com