Rigging Hardware - Clamp
A wire rope clamp, also called a clip, is used to fix the loose end of the loop back to the wire rope. It usually consists of a u-shaped bolt, a forged saddle and two nuts. The two layers of wire rope are placed in the u-bolt. The saddle is then fitted over the ropes on to the bolt (the saddle includes two holes to fit to the u-bolt). The nuts secure the arrangement in place. Three or more clamps are usually used to terminate a wire rope.
- W19045
- ROPE CLAMP, STEEL ZINC PLATED
- W19046
- ROPE CLAMP, STEEL ZINC PLATED
- S19046
- ROPE CLAMP, STAINLESS 304
- B19053
- ROPE CLAMP
- SIZE: 7/8" x 1-7/8"
| ROPE SIZE | ||
|---|---|---|
| W19045 | W19046 | S19046 |
| 1/2" (12mm) | 3/8" (9mm) | 3/8" (9mm) |
| 5/8" (16mm) | 1/2" (12mm) | 1/2" (12mm) |
| 3/4" (20mm) | 5/8" (16mm) | 5/8" (16mm) |
| 1" (24mm) |
Main Products:
climbing hardware, safety equipment, climbing gear, climbing mountaineering, Carabiners, Climbing Carabiner, Marine Hardware, Rigging Hardware, Saddle Hardware, Safety Hook, Snap Hook, Shackle, Turnbuckle,Quick Link, Bolt, Deck Hardware, Swivel, Rigging Hardware, Terminal, Wire Rope Clip, Wire Rope
