is used for diagnosis and programming BMW vehicles after E65

is used for diagnosis and programming BMW vehicles after E65

BMW OPS

BMW OPS

BMW OPS (With Most Cable)

Product ID: BMW OPS

Send Inquiry
Ops interface box
ops is used for communicating cats via obd-II, but also used for programming cars since e65 with light port and communicating with most cable, which will greatly shorten the time of programming.
The OPS optical programming system can be used to program vehicles from E65 as it allows, in addition to vehicle access via the OBD II interface, access to the MOST bus. Reference systems for the programming times of the E60 Series are exclusively the OPPS and OPS systems in association with DISplus, GT1 and the Software Service Station. There is no difference in the programming times when using the OPPS or OPS as the vehicle interface.

the OPS does not have an air interface, as the high bandwidth required for programming can currently only be achieved by means of a cable connection.
Suitable: 1.Diagnosing and programming all the BMW vehicle with OBD II.2.unavailable for the BMW vehicles with 20 pins before 2000.Testable system:

1. OPS Orange Multiplexer.
2. OBD-II diagnostic cable.
3. LAN cable.
4. MOST cable.
5. DIS HD for IBM T22/T30 Laptop
6. SSS HD for IBM T30 Laptop
7. TIS DVD Attention: E60, E65, E70, E87, E90 have both OBD-II socket and Most socket. Software: the same with GT1 (DIS, SSS).
Specifications
.OPS is mainly used for diagnosis and programming BMW vehicles after E65 series.

Main Products

Benz xp-star, Benz Compact 3 STAR, BMW GT1, BMW OPS , Porsche Piwis , Honda HDS, Toyota Tester, Digimaster II, and Digi-consult

Contact Detail