Road marking equipment for thermoplastic paint
1/. Thermoplastic meter
Specially designed for fast, efficient melting thermoplastic paint material at construction spot. Available with single kettle or double kettle, skid or trailer mounted
1. Engine: 18 HP water-cooled or wind-cooled electric startup diesel engine.
Max rotating speed: 2200r/min.
2. Agitator: Hydraulically driven, in clockwise and anti-clockwise direction.
3. Hydraulic oil tank: Capacity: 50L. Hydraulic oil: 68#
4. Heating system: LPG heating system. Temperature:0-30 degree C free adjustable. (50kg LPG jar supplied by user).
5. Melting Kettle: Single kettle or double-kettlevertical, with vertical hydraulic agitator.
6. Safety device: With fire extinguisher and automatical protective device for overloading
Model Capacity (kg)
RFS700 2x350 truck mounted
RFS1000 2x500 truck mounted
RFD450 450 truck mounted
RFL700 2x350 Wheeled mounted
2/. Operator-propelled thermoplastic applicator, RST-I/II
Material tank: 75kg
Variable width glass bead dispenser: 100, 150, 200, 300mm, hopper: 15kg
Line width: 100mm, 150mm, 200mm, 300mm,
Line thickness: 1.5-2mm.
Hat system: Fueled by LPG
Lock rear caster
l. Material tank: With vertical manual agitating device.
Heating temperature:0-260 degree, freely adjutable.
Capacity: 75kg.
RST-I: Insulating tank, made of antioxidation cold rolled steel with stainless steel jacket.
RST-II: Insulating tank, made of antioxidation cold rolled steel.
2. Marking bucket: Screeding structures made of heat-resistant, abrasion-resistant, antioxidation steel. Drawknife is made of
tungsten carbide.
3. Heating system: Consist of Valve, furnace, burn nozzle, gas meter, torch and hose, Fueled by one 15kg LPG jar (LPG jar supplied by user).
4 . Glass bead bin: With window for checking beads quantity, capacity:15kg.
5. Glass bead dispenser: Automatical quantitative dispensing synchronising with paint screeding system.
6. Framework: Steel welding frame, surface chrome-plated or coated heat-resistant coating.
7. Locking rear swivel caster: locks into straight or radius mode for striping straight line, arc or curves line.
8. Lineation width: 100mm, 150mm, 200mm, 300mm, available by changing marking bucket.
9. Lineation thickness: 1.5-2.5mm, freely adjustable.
10. Dimension: 1200mm(L) x 830mm(W) x 1050mm(H).
11. Weight: 155kg (with 150mm bucket, exclusing LPG jar).
Option: 400mm or 450mm bucket for zebra-crossing marking.
3/. Self-propelled thermoplastic applicator RYZ-I, ZRST-I
1. Engine: 5.5 HP manual start or electric start four-stroke air-cooled gasoline engine. (Option: electric start gasoline or diesel
engine or liquefied gas engine).
2. Driving system: Oil-pressure variable speed transmission system with
automatical brake device, flexible move in forward, reverse or stop(HTS).
Forward: 0-4km/h.
reverse: 0-3.2km/h.
Climbing: 15°.
3. Electronic controller: PLC micro-electronic intelligent control for freely
adjusting convex line space, length, spaces, height.
Standard convex height: 3-7mm.
RYZ-I: knob control panel
ZRST: No electrical controller.
4. Heating Fuel: Consist of Valve, furnace, burn nozzle, gas meter, torch and
hose. Fueled by 15 kg LPG jar ( 15kg LPG jar supplied by user).
5. Material tank: Heat insulation tank made of stainless steel or antioxidation
cold rolled steel with manual vertical agitating device ( option: pneumatic
agitating device).
Capacity :65L (about 120kg)
Heating temperature:0-300℃, freely adjustable.
6. Glass bead bin: With window for checking beads quantity.
Capacity:15kg.
7. Glass bead dispenser: Automatical quantitative dispensing synchronising with paint screeding system.
8. Framework: Steel welding frame, surface chrome-plated or coated heat-resistant coating.
9. Marking bucket: Pneumatic screeding structure, made of heat-resistant(2000°C),antioxidation special steel. Drawknife made of
tungsten carbide. Standard bucket: 150mm.
10. Locaking rear swivel caster: locks into straight or radius mode for striping
straight line, arc or curves line.
11. Lineation width: 100mm, 150mm, 200mm, 300mm, available by changing
marking bucket.
12. Lineation thickness:
RYZ and ZRST 1.5-2.5mm, freely adjustable.
RYZ: Convex line height:3-7mm, freely adjustable.
Option: Operator standing trail chassis.
4/. Ride-on thermoplastic applicator
Model: XRZ-I
1. Engine: The 18Hp water-cooled electric startup diesel engine with four cylinder inline, low noise and environmental protection has water temperature, voltage and engine oil indication.
Max rotating speed:3000r/min.
Fuel tank: 50L
2. Driving system: HTS variable speed transmission system with automatic brake device, freely operated in forward, reverse, stop.
Forward: 0-22km/h;
Reverse: 0-12km/h;
Climbing: 15 degree max
3. Marking bucket: Hydraulic pressure driven pneumatic controlled scraped marking bucket. Structure board made of high temperature resistance and oxidation resistance special steel sheet. Floor knife adopts tungsten steel knife-head. Standard configuration including 150mm bucket. (Option for other size according to customer)
4. Material tank: Capacity: 450kg, heat insulation jacketed, made of cold-rolling oxidation resistant steel with erect type hand stirrer device. Temperature to be freely controlled according to the different coating.
5. Glass beads dispensing system: Hopper capacity: 75kg, synchronous with the paint screeding system.
6. Air compressor: Piston type, 0.6m3/min
7. Chassis: Firm welding frame, four wheel structure, gas-filled tubeless tyre diameter 500mm, hydraulic power assist tilt wheel steer wheels, stable brake system, operator seat on the left or right
8. Electronic control: Set various marking standard control, enables the micro-electronics intelligent control. Freely adjust the types of marking according to customer individual.
9. Guide rod: The telescopic guide rod to be freely adjusted to up, down, left and right.
10. Alarming: Adjustable alarming lamp with flicker requency, for improving the safety condition (Option for the electronic direction warning arrow on the back of the machine, Arrow direction to be freely adjusted.)
11. Dimnsion: 2380mm (L)x 740mm(W)x1650mm(H).
12. Weight: 585kg(exclding 50KG LPG jar)
13. Transportation: Option for tilt-trailer (type:TGC-I)device, easy for long distance transportation.
5/. Operator propelled theroplastic applicator for zebra crossing RBM400(450)
Specially designed, operator-propelled, mainly used for marking zebra crossing on pavement, parking lot, airfield, urban, etc, easy
use and less maintain.
1. Marking bucket: Screeding structure marking bucket is integrated with material tank with a filter screen inside. Drawknife is
made of heat-resistant, abrasion-resistant, antioxidation alloy steel. Capacity: 50kg.
2. Heating system: Consist of valve, furnace, burn nozzle, gas meter, torch and hose, fueled by one 15kg LPG jar. (jar supplied
by user)
3. Glass beads bin: Automatical quantitative dispensing synchronising with paint screeding system,
with window for checking the quantity of glass bead. Capacity: 30kg.
4. Chassis: Steel welding frame, surface chrome-plated or coated heat-resistant coating.
5. Lineation width:
350mm,400mm,450mm,500mm available by changing market bucket.
6. Lineation thickness: 1.5-3.5mm, freely adjustable.
7. Dimension:1300mm (L) x 750mm (W) x 900mm (H).
8. Weight: 142kg (with bucket 400mm, excluding LPG jar).
7/. Self-propelled thermoplastic applicator for zebra crossing marking ZRBM
1. Engine: 3.0 Hp gasoline engine.
2. Driving system: (HTS).
Forward: 0-4km/h.
reverse: 0-3km/h.
Climbing: 15 degree
3. Heating system: Fueled by 15 kg LPG jar ( 15kg LPG jar supplied by user).
4. Marking bucket: Screeding structure marking bucket is integrated with material tank with a filter screen inside. Drawknife is made of heat-resistant, abrasion-resistant, antioxidation alloy steel. Capacity: 75kg.
5. Locaking front swivel caster: .
6. Marking speed: 6-8m/min.
7. Lination width: 350mm, 400mm, 450mm, 500mm(optional by changing market bucket).
8. Glass beads dispenser: Capacity: 30kg.
9. foot brake system.
Main Products:
vibratory finishing machine, sand blast machines, road marking machine
