Surface roughness tester CR-4032

Product ID: CR-4032

Send Inquiry
This instrument is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters. When measuring the roughness of a surface, the
sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism inside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate
analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.

Display: 4 digits, 10 mm LCD, with blue backlight
Parameters: Ra, Rz, Rq, Rt
Display Range
Ra, Rq: 0.025-16.00um/1.000-1600uinch
Rz, Rt: 0.020-160.0um/0.780-9999uinch
Accuracy: Not more than ±10%
Fluctuation of display value: Not more than 6%
Sensor :
Test Principle: Inductance type
Radius of Probe Pin: 5um (default) 2µm
Material of Probe Pin: Diamond
Measurement Force of Probe:
4mN(0.4gf) for 5um stylus
0.75mN(0.075gf) for 2um stylus
Probe Angle: 90°
Vertical Radius of Guiding Head: 48mm
Maximum driving stroke: 17.5mm/0.7inch
Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional
Driving speed:
Vt=0.135mm/s if sampling length = 0.25mm
Vt=0.5mm/s if sampling length = 0.8mm
Vt=1mm/s if sampling length = 2.5mm
Vt=1mm/s if returning
Profile digital filter
Filtered Profile: RC
Filtered Profile: PC-RC
Filtered Profile: Gauss
Non-Filtered Profile: D-P

Resolution : 0.001μm if reading <10μm
0.01μm if 10μm≤reading<100μm
0.1μm if reading ≥100μm
Evaluation length :( 1~5) cut-off optional
Operating conditions: Humidity
  • ce

Main Products

coating thickness gauge ,ultrasonic thickness gauge,hardness tester,