Laser Angel Level

Product ID: A-700

Send Inquiry
Excellently repeatability. Reset: for setting a pseudo-horizon, upon which a new angle based on the pseudo-horizon can be directly measured. Double check: double annular graduations provided for calibrating either positive or negative degrees.
  • Laser power: 650nm x 5mM
  • Accuracy: 0.05 degree
  • Weight: 550g
  • Laser distance: 100 meter
  • MTBF: > 5000Hrs.
  • Battery: CR123A DC 3V
  • Size: 140 x 140 x 50mm
  • Material: metal and PC plastic
  • IOP: < 45mA
  • Quick setting & measurement instructions:
    • Align degree on the outer scale with the center 0 on the fixed vernier scale.
    • Read the angle on the inner scale that aligns with the hairline (triangle) in the yellow arrow.
  • Precision angle measurement instructions:
    • Set the angle / level's base on the surface to be measured.
    • Rotate the inner scale until the hairline (triangle) on the yellow / arrow aligns exactly with the hairline (triangle) on the inner scale.
    • Read the angle in degrees on the outer scale, directly below the center 0 on the fixed venier scale.
    • If the angle falls between degree marks, read the "lower" degree then observe which mark on the fixed vernier scale aligns with a mark on the outer scale. If the yellow arrow is left of center find the alignment mark right of center and vice versa. This is the tenth's of a degree over the "lover" degree.
  • Precision angle setting instructions:
    • Rotate the inner & outer scales until the desired angle aligns with the fixed vernier scale.
    • Place the angle / level on the surface to be set and rotate or raise until both hairlines (triangle) align.

Main Products

angle level / tool