Kutai Electronics Co., Ltd.

Send an inquiry Universal Pre-Assembled Auto-Start Genset Control Panel

Product ID: G-08

Provide Protection & Full Instrumentation For All Types of Generator Set Up To 3000 Amp Output
G-08 is built with ECU-11 to fit DC 12V input
G-08 includes ECU-02, ECU-11, Harness, 3 gauges (Water Temp, Oil Temp., Charge Current), Start Relay & Stop Relay.

Click here

Specifications:
  • 4 Digit 7 Segment Easy-to-Read LED Display
    • Easy-to-Read Large LED Display
    • Programmable Display with 3 Phase Volts, Amp & Freq.
    • Failure Alarms Status
    • Battery DC Voltage Indicator
    • Total Engine Operating Hours & Service Alarm
    • Internal Program Settings & Status
  • Protection & Alarm Status
    • Engine Start Failure
    • Engine Over Speed
    • MPU Failure
    • Abnormal Generator Voltage
    • Low Engine Oil Pressure
    • Emergency Stop Activated
    • High Engine Temperature
    • Generator Over Load
    • Low Fuel Level
    • Low DC Voltage
  • Power Input: Voltage 9 ~ 30 VDC
  • Sensing Input
    • Voltage: 15 ~ 380 VAC 3 phase 3 wire
    • Frequency: 50 ~ 60 Hz
  • MPU Signal Input
    • Voltage: ±2V to ±70V Peak
    • Frequency: Min.100Hz, Max.10KHz
  • Control Signals: Current 2.5 Amp with input volts
  • CT Specifications
    • Burden: 2.5VA
    • CT Range: Min. 25A/5A, Max 3000A/5A
  • Power Consumption: Under 7 Watt
  • Operating Temp.: -25 ~ +75 °C
Features:
  • Micro-Processor Based Design
  • Convenient Alarm Table In Any Language
  • Provides Failure Alarm Status & Signals
  • Remote & Manual Starting / Stopping
  • Powder Coated Finish Steel Enclosure
  • Simple Operation & Programming
    • There is no need for PC connection or software--all operation can be done directly on G-08
  • Withstand Severe Vibration
  • Built-In Additional 70 Amp Relay
  • Superior Serviceability & Easy Maintenance
    • Customized settings are auto-saved into memory and will remain even when power is off

Main Product:
Engine control unit, Transfer Switch, Generator Voltage Regulator, Automatic Transfer Switch, Automatic Voltage Regulator, Automatic Battery Charger, Electronic Governor Controller, ATS Controller and

Send an inquiry

Contact Details

CEO: Jeff Leu
Sales Contact: Ian Chang
Address:No.3, Lane 201, Chien Fu St., Chyan Jenn Dist. Kaohsiung, 806 Taiwan
Tel:886-7-8121771
Fax:886-7-8121775