Kutai Electronics Co., Ltd.

Home > Electrical and Electronics >Heavy Electric Machinery >Automatic Control Panels

Digital Gen - Set PLC Control Unit

Product ID: GCU-2000

Click here for details.

Provides Full Instrumentation & Protection On Any Generator Set.

Click here

Specifications:

Power Input: Voltage 9 ~ 36 VDC (12V, 24V)
Sensing Input

Voltage: 15 ~ 500 VAC 3Phase 4Wire.
Frequency: 50 / 60Hz

MPU Signal Input

Voltage: ±2 ~ ±70 VAC
Frequency

Min.: 100Hz
Max.: 10KHz

CT Specification: Burden 2.5 VA
Power Dissipating: Max. 7 Watt
Operating Temp.: -20 ~ 70°C
Relative Humidity: < 95%
Max. Vibration:

5 ~ 25Hz ±1.6mm
25 ~ 100Hz a=4g

Large LCD Display

Programmable Display with 3 Phase Volts, Amp & Freq.
Engine Operation Hours & Battery Voltage Display
Can Display Different Unit Of Temperature & Oil Pressure
Failure Signal Status By Graphic Display

Protection & Alarm Status

Engine Start Failure
Engine Over Speed
Sensor Failure
Abnormal AC Voltage
Low Engine Oil Pressure
Emergency Stop Activated
High Engine Temp.
MPU Failure
Generator Over Load
Abnormal Battery Voltag

Customized settings are auto-saved into memory and will remain even when power is off
Provide gen-set run-in modulate model and manual start and stop functions, when user proceed modulate controller will shut down all protect functions.

Features:

Micro-Processor auto control & protection.
Easy to read large LCD display.
Modularity design, easy to install.
Provide accurate temperature and oil pressure display.
Provide full engine & generator alarms signals shutdowns.
All Functions Setting: Can be done directly on GCU2000 No need for PC connection.
Provide emergency stop and voltage adjustment on front panel.
RS-232 communication interface.
Total Of 15 Memorable Event Logs

Main Product:
Engine control unit, Transfer Switch, Generator Voltage Regulator, Automatic Transfer Switch, Automatic Voltage Regulator, Automatic Battery Charger, Electronic Governor Controller, ATS Controller and