Applications:
For the electronic measurement of currents: AC, DC IMPL.,etc.,with galvanic isolation between the primary (high power) and the secondary (electronic) circuits.
Main Technical Data:
1. Primary normal current IPN: 25A r.m.s
2. Primary current, measuring range IP: 0~+/-70A
3. Measuring resistance: RMmin RMmax with +/-12V @ +/-25A max: 54 ohm 360 ohm @ +/-70A max: 35 ohm 52 ohm with +/-15V @ +/-25A max: 54 ohm 470 ohm @ +/-70A max: 35 ohm 84 ohm
4. Secondary normal current: 25mA rms
5. Conversion ratio: 1-2-3-4:1000
6. Supply voltage(+/-5%): +/-12V~+/-15V
7. Current consumption: 12mA+ Secondary output current
8. Isolation test: Between the primary circuit to the secondary circuit(+.-.M):3kVrms/50Hz/1min
Accuracy - Dynamic Performance Data:
1. Accuracy @ IPN, TA=+25¢XC , @+/-15V: +/-0.5%
2. Non-linearity: better than +/- 0.2%
3. Offset current: not more than +/-0.15mA(@+25¢XC)
4. Residual current @ IP=0, TA= +25¢XC, after an overload of 3xIP: +/-0.2mA
5. Thermal drift: +/-0.6mA (-40 ¢XC ~ +85 ¢XC)
6. Response time: not more than 1us
7. DI/DT accurately followed: better than 50A/us
8. Frequency Bandwidth (0.5dB): DC 0~150kHz
General Data:
1. Operating temperature: -40¢XC ~ +85¢XC
2. Storage temperature: -40¢XC ~ +90 ¢XC
3. Secondary coil resistance: not more than 66 ohm
4. Weight: 17g
5. Standards: EN 50178
Please also see our hot products as below:
automatic toilet flusher
voltage sensor
automatic sensing faucet
automatic soap dispenser
current sensors
sensor faucet
automatic hand dryer
automatic faucet
voltage transducer
automatic tap
automatic urinal flusher
current transducer
Specifications:
Features:
- Hall effect measuring principle
- Galvanic isolation between primary and secondary circuit
- Insulated plastic case made of white PPO recognized according to UL 94-V0
- The whole current transducer comply with RoHS Directive completely
Certificate:
ISO 9001, ISO 14001
Ordering information:
- Minimum Order: Negotiable
- TEL: 86-574-8738 3998
- FAX: 86-574-8735 9851
- E-mail: sarah-chen@zelrinb.com.cn