Water Circulation Mold Temperature Controller
The Mold Temperature Controller-Water Circulation Mold Temperature Controller is major for controlling the temperature of the mold in the plastic injection molding machine.
Specifications:
Features:
- The temperature control adopted micro processor (P.I.D) touching type ,there is stored automatic calculation inside, precise and reliable, it can control within ± 1°C and save electricity over 35%
- Medium circulation pipe with stainless steel.
- Automatic start and exhaust air.
- Automatically reduce the temperature after stop pump,automatically shut down after set time.
- Automatically recover water circulation from the mold.
- Circuit Beaker.
- Motor reverse protective lamp.
- Water shortage protective lamp.
- Pump overload protective lamp.
- Outlet water pressure gauge.
- By-Pass system.
- Buzzer.
- Inlet temperature digital dislay gauge.
- Phase failure protecter.
- OEM/ODM Product
- Branded Product
- Buyer's Label Offered
Certificate:
CE
Others:
| Model | TWD-120(1HP) | TWD-120(2HP) | TWD-120(3HP) |
| Temp. Control Range | 40 ~ 120°C | 40 ~ 120°C | 40 ~ 120°C |
| Temp. Control Accuracy | ± 1°C | ± 1°C | ± 1°C |
| Temp. Control Method | Double proportional integral derivative | Double proportional integral derivative | Double proportional integral derivative |
| Power | 3Ø 220V 60Hz (or other) | 3Ø 220V 60Hz (or other) | 3Ø 220V 60Hz (or other) |
| Heat Transfer Medium | Water | Water | Water |
| Cooling Method | Direct Cooling | Direct Cooling | Direct Cooling |
| Heating Capacity | 8 Kw | 8 Kw | 8 Kw |
| Pump Power | 1 HP | 2 HP | 3 HP |
| Max Pump Flow | 135 l/min | 180 l/min | 268 l/min |
| System Pressure | 5 kg/cm² | 6 kg/cm² | 6 kg/cm² |
| Power Supply | 9 Kw | 9.5 Kw | 11 Kw |
| Cooling water pipe | 1/2 | 1/2 | 1/2 |
| Circulation water pipe | 3/8 x 4 (or other) | 3/8 x 4 (or other) | 3/8 x 4 (or other) |
| Machine Size | 800 x 300 x 720 mm | 800 x 300 x 720 mm | 800 x 300 x 720 mm |
| Weight | 72 kg | 79 kg | 80 kg |
Ordering information:
- Minimum Order: 1 Set set
- TEL: 886-2-26826777
- FAX: 886-2-26826778
- E-mail: wedlon@wedlon.com.tw