Commutator Turning Machine
Product ID: WT-180
Commutator Turning Machine
This machine is an automatic device used cutter to turning commutator dia.
The armature put on the V-block by operator.
The belt device goes downward to oppress the lamination, then start turning. And the machine will automatic cutter forward → turning → cutter backward (cutter back to original position) → completion.
Equipped with induction motor and pneumatic transmission system alone with precise tooling via PLC controller for armature turning.
- Stably feeding, high roundness and accuracy.
- V-block with artificial diamond and auto lubrication system.
| Specification | Standard |
|---|---|
| Armature Diameter | 20-50mm |
| Commutator Diameter | 7-38mm |
| Commutator Height | 15-40mm |
| Shaft Length | 50-350mm |
| Shaft Diameter | 3-15mm |
| Processing Length | 40mm |
| Concentricity | 3µ |
| Surface Roughness | 3 ~ 5µ |
| Tooling | V-block with artificial diamond |
| Cutter | Cutter with artificial diamond |
| Motor | 1/2HP |
| Controller | PLC controller |
| Air Pressure | 4-6kg/cm2 |
| Power Supply | 1Ø 220V ±10% 50/60HZ |
| Dimension | 600L x 800W x 1200H (mm) |
| Weight | 250kg |
Main Products:
Shaft, commutator, papper inserting machine, coil winding machine, fusing machine, turning machine, testing machine
Contact Details
Sales Contact: Anita, Marketing Sales
Minimum Order:Negotiable
Address:No. 13, Wu-Chuan 1RD., Hsinchuang City, Taipei Hsien, Taiwan (Wu-Koo, Ind. Park)
Tel:886-2-2299-6942
Fax:886-2-2299-6943
E-mail:
wado@wado.com.tw
