Turning Lathe
Product ID: 02

Han Yang CNC Lathe
Meet the demand for high variety of products and automation of production. 24 hours continuous operation. 16 hours no-man operation. Auto tool length measurement and tool offset compensation. Main turret and sub-turret can work simultaneously.

Specifications:

Features:

• Spindle
• Heavy duty spindle design features three bevel angular ball bearings in the front and the rear supported by roller bearings to achieve high speed and high load.
• All spindle bearings are class P4 (ABEC-7), AC spindle motor 3.7/5.5kw, max. torque 37.6nm for 938rpm output.
• Axial Feeding System
• Driven by AC servo motor, directly connected by flexible coupling and ball screw to eliminate noise and back play.
• Class C3 ball screw supported by class P4 bevel angular in the front and rear for high rigidity and high precision.
• Better surface finish is obtained by the precision ground guideways hardened HRC 50° ~ 54° features high efficient lubrication system.
• Turret System
• 8-tool powerful turret features 140mm curvic teeth coupling driven by hydraulic to achieve 14kn locking force. The turret is driven by AC servo motor, tool changing time (1 tool) 0.2 second, (diagonal tool) 0.5 second.
• Automation System
• Solutions including bar feeder, parts catcher, parts conveyor, auto tool length measurement are offered for the demand of automation of production.
• Bar feeder connecting interface is standard with built-in control software, ready for operation after connecting to the power source.
• Dual arm swing parts catcher puts the workpiece to the conveyor free from chips and cutting oil.
• Standard conveyor feeds the workpiece outside the machine, intermit turning time is set by parameters for energy saving.
• 4-point tool measurement system measures X and Z direction of the tool and auto compensates tool length and diameter and the wear.
• Application range: Tool measurement / auto tool compensation / tool tip compensation / tool damage detection / auto spare tool selection.
• Coolant and Chip Disposal System
• Dual coolant pumps flushes out chips on Z axis guard with high flow of cutting fluid, high pressure pump connects with the turret solving deep hold problems.
• Various types of chip disposal systems are available on request.
• Main parts including the bed and saddle are made of high class meehanite cast iron, rigid and solid construction, guideways are hardened HRC 50° ~ 54°, precision ground and hand scraped to achieve geometric tolerance beyond the standard.
• Standard
• Collet chuck.
• Parts catcher.
• Parts conveyor
• 3-color indicator lamp.
• Work lamp.
• Bar feeder interface.
• Tool holder.
• Coolant system.
• Auto lubrication system.
• 8-tool turret.
• Full enclosed guard.
• Hydraulic system.
• Optional
• Screw chip conveyor.
• Scraper chip disposal.
• Chip trolley.
• Mist collector.
• Auto tailstock.
• Tool setter.
• Bar feeding system.
• Auto power shut off.
• Power transformer.
• CE approved circuit.




Others:

Item	HY-T34	HY-T42
Capacity: Bar capacity	34 mm	42 mm
Capacity: Max. working length	150 / 172 mm	150 / 175 mm
Travel: X axis	115 (19 + 96) mm	115 (19 + 96) mm
Travel: Z axis	200 mm	200 mm
Spindle: Chuck type	Collet chuck	Collet chuck
Spindle: Chuck size	150 mm	150 mm
Spindle: Spindle nose type	A2-5 Standard	A2-5 Standard
Spindle: Spindle speed	60 - 6,000 rpm	50 - 5,000 rpm
Spindle: Spindle torque	31.3 Nm	37.6 (56) Nm
Spindle: Spindle feed through size	36 mm	45 mm
Spindle: Spindle bearing size	90 mm	90 mm
Spindle: Distance from the ground	1,010 mm	1,010 mm
Turret: Turret type	Disc	Disc
Turret: Nos. of tool rest	8	8
Turret: Boring shank size	25 mm	25 mm
Turret: O.D. shank size	20 x 20 mm	20 x 20 mm
Turret: Index time (1 tool)	0.2 sec	0.2 sec
Turret: Index time (diagonal tool)	0.5 sec	0.5 sec
Feed rate: Rapid federate X / Z	20 / 20 m/min	20 / 20 m/min
Feed rate: Cutting feed rate	0.001 ~ 1,000 m/min	0.001 ~ 1,000 m/min
Feed rate: Thrust force X / Z	8,378 / 5,027 N	8,378 / 5,027 N
Feed rate: Ball screw X-dia / pitch	25 / 10 mm	25 / 10 mm
Feed rate: Ball screw Z-dia / pitch	25 / 10 mm	25 / 10 mm
Tailstock: Quill Dia	45 mm	45 mm
Tailstock: Quill travel	100 mm	100 mm
Tailstock: Distance between chuck and center	130 - 230 mm	130 - 230 mm
Tailstock: Bore taper	MT-3	MT-3
Power source: Spindle motor	3.7 / 5.5 kw	3.7 / 5.5 (5.5 / 7.5) kw
Power source: Feed motor X / Z	0.6 / 0.6 kw	0.6 / 0.6 kw
Power source: Turret servo motor	0.4 kw	0.4 kw
Power source: Coolant pump	0.2 kw	0.2 kw
Power source: Hydraulic pump	1.5 kw	1.5 kw
Power source: Parts conveyor	0.03 kw	0.03 kw
Power source: Chip conveyor	0.2 kw	0.2 kw
Power source: Lubrication pump	0.003 kw	0.003 kw
Power source: Mist collector	0.75 kw	0.75 kw
Power source: Bar feeder	1.5 kw	1.5 kw
Tank capacity: Coolant tank	145 Liter	145 Liter
Tank capacity: Hydraulic tank	40 Liter	40 Liter
Tank capacity: Lubricant tank	2 Liter	2 Liter
Dimension: Height	1,800 mm	1,800 mm
Dimension: Width	2,130 mm	2,130 mm
Dimension: Depth	1,355 mm	1,355 mm
Dimension: Weight	2,500 kg	2,500 kg
Dimension: Floor area (standard equipment)	2,130 x 2,080 mm	2,130 x 2,080 mm
Equipment requirement: Power requirement (full equipment)	15 KVA	15 KVA
Equipment requirement: Air pressure	Non	Non
Equipment requirement: Air pressure flow	Non	Non

Ordering information:

• Minimum Order: Negotiable
• TEL: 886-2-29964918
• FAX: 886-2-29933081
• E-mail: pan.sp@msa.hinet.net