Product ID: OC-3

Hydraulic Cylinder

Sunny Enterprises Co., Ltd. a qualified OEM Manufacturer and ODM Manufacturer for Hydraulic Cylinder especially for Manufacture of Hydraulic Press, Hydraulic Cylinder and Broaching Machines . It is professional on global B2B trading with Hydraulic Cylinder, Hydraulic Press, Hydraulic Cylinder, Broaching Machines and 4 - Column Presses since 1966 .

Hydraulic Cylinder

A hydraulic cylinder is a mechanical actuator that provides a linear force through a linear stroke, which is known as a linear hydraulic motor.

The hydraulic cylinder is a very useful tool when everyone intends to use it as double acting applications. The tube of the hydraulic cylinder is skived and roller burnished and precisely finished steel for extended the seal life. It¡¦s hard chrome plated provides corrosion resistance and minimizes tube scoring and seamless steel tube honed to 10/16 micro inch finish while the thicker wall is much better than traditional low pressure hydraulic cylinder. Because the ticker wall can decreases the wear on piston seal and the tube surface and give additional protection from leaks.

The cartridge of the hydraulic cylinder is floating and self aligning bearing, which is made form ductile iron with the option of bronze or slip tuff coating, is retained by cap screws and the chrome plate providing for strength and shock resistance. The benefit of the floating condition of the cartridge on the hydraulic cylinder is to reduce the piston rod misalignment as deleting side loading. Therefore, it¡¦s easily to remove for rod seal an wiper maintenance without any requiring special additional tools to disassemble the hydraulic cylinder.

The rotating gland on the hydraulic cylinder is adjustable by using a spanner wrench to rotate the gland and can be rotate in 360 degree. It¡¦s a high quality adjustable vee packing that supported on both ends by nylon bearings and offer maximum seal life while increase support against side loading during hydraulic cylinder operation. It allows users to make port alignments as they require while the port is recessed to increase the design of the slender hydraulic cylinder. Some of the ports are on the fixed base and some of the ports are located on the rotating gland. The port on the gland is in a clock-wise direction, vise versa is applicable.

It¡¦s not suggested to rebuild the construction and replacement of the components when the hydraulic cylinder is broken, however, it¡¦s suggestion that the user replacing the entire hydraulic cylinder because of efficiency.

Please also see our hot products as below:
Broaching Machine
Hydraulic Cylinder
4 Column Presses
C-Frame Presses
Hydraulic Press

Click here for details.

Features:

• Sunny Hydraulic Cylinder.
• Range of bore dia. from 40 ~ 250 mm.
• Pressure rated 7 MPa, 14 MPa.
• Optional max. 70 MPa.
• The specification can be made per customer's - request (OEM / ODM).

• Minimum Order: Negotiable
• TEL: 886-2-27912121
• FAX: 886-2-27910871
• E-mail: sunny@sunnyent.com.tw