|
Gau Feng Machine Shop Co., Ltd.
 |
Product |
|
|
Product ID: GF Series
Sander Machine - Wide Belt Sanders, Belt Sander, Wide Belt Sanding, Surface Sander
Gau Feng Machine Shop Co., Ltd. a qualified OEM Manufacturer and ODM Manufacturer for Sander Machine - Wide Belt Sanders, Belt Sander, Wide Belt Sanding, Surface Sander especially for Manufacture of Wide Belt Sander, Sander Machine and Moulder Machine . It is professional on global B2B trading with Sander Machine - Wide Belt Sanders, Belt Sander, Wide Belt Sanding, Surface Sander, Wide Belt Sander, Wide Belt Planning Sanding Machine, Sander Machine and Moulder Machine since 1997 .
HIGH QUALITY CONVEYOR BELT
The sander employs high quality belt for long service life.
ADDITIONAL EMERGFNCY STOP SWITCH
An additional emergency stop switch is provided on rear of the machine, providing and immediate stop control of al operating systems.
VARIABLE FEED SPEED DEVICE
The variable speed of the conveyor belt is achleved through variable speed pulley.
Permitting for sanding a variety of panel material feed speed is adjusted by turning a speed regulator knob.
DIGITAL POSITION CONTROLLER
The conveyor table adjustment is controlled by the digital position controller, providing accurate digital readout. The sanding thickness can be preset for maximum operation convenience.
CENTRALIZED CONTROL PANEL
All motion controls of the machine are centralized on a control panel. large, clearly simplify setup and start up.
SNADING BELT TECSION CONTROL
The sanding belt tension is actuated by cylinder, and oscillation tracking is controlled by photocell sensor.
|
Sander Machine
 Click here for details.
|
|
|
| Model |
GF-615 0 |
GF-615 A |
GF-615 0A |
GF-615 00A |
| Working width |
610mm(24') |
610mm(24') |
610mm(24') |
610mm(24') |
| Working height |
150mm(8') |
150mm(8') |
150mm(8') |
150mm(8') |
| Main motor standard |
15HP |
10HP |
10 , 15HP |
15 ,10 ,10 HP |
| Feed motor |
1HP |
1HP |
2HP |
3HP |
| Table hoist motor |
1/2HP |
1/2HP |
1/2HP |
1/2HP |
| Feed speeds (Variable) |
4-16 M/min |
4-16 M/min |
4-16 M/min |
4-16 M/min |
| Sanding belt size |
24 |
24 |
24 |
24 |
| Compressed air required |
5 kg/cm² |
5 kg/cm² |
5 kg/cm² |
5 kg/cm² |
| Exhaust volume requirement |
2,575 M³/Hr |
2,575 M³/Hr |
3,090 M³/Hr |
3,090 M³/Hr |
Main Product:
Wide Belt Sander, Wide Belt Planning Sanding Machine, Sander Machine, Moulder Machine, Wide Belt Sander, 4 Side Planer & Moulder, Tenoner Machine
|
Ordering information:
- Minimum Order: Negotiable
- TEL: 886-4-22394422
- FAX: 886-4-22394420
- E-mail: gau.fong@msa.hinet.net
|
|
Print this page
Send an inquiry
;)
